Mühendislik Fakültesi

AKAY D. KULAK O.* HENSON B. Conceptual Design Evaluation Using Interval Type-2 Fuzzy Information Axiom, Computers In Industry, 138-146, (2011)

AKYOL, E., Strengthening foundations of seismically weak buildings on sandy soils in Denizli, Turkey, Environmental Earth Sciences, Volume 66, Issue 5 (2012), Page 1415-1421

ALÇIÇEK H. ALÇIÇEK M.C. 2012. Sedimentary and stable isotopic composition of the palustrine carbonates and pedogenic calcretes in the SW Anatolia: Implication on the Plio-Pleistocene regional climatic turnover in the Eastern Mediterranean. Journal of Sedimentary Research (accepted)

ALÇIÇEK H. MORENO G. 2012. Late Miocene-Pliocene fluvio-lacustrine setting in Karacasu Basin, SW Anatolia, Turkey: Depositional palaeogeographic and palaeoclimatic implications. Sedimentology (accepted)

ALÇIÇEK M.C. MAYDA S. ALÇIÇEK. H. 2012. Faunal and palaeoenvironmental changes in the Çal Basin, SW Anatolia: implications for regional stratigraphic correlation of late Cenozoic basins. Comptes Rendus Geoscience 344, 89-98

ALÇİÇEK M.C. MAYDA S. TİTOV V.V. 2012. Early Pleistocene palaeogeography in the SW Anatolia: Insights on the regional stratigraphical correlation and faunal migration. Comptes Rendus Geoscience (accepted)

ALKAYA D, ÇOBANOĞLU İ., YEŞİL B., YILDIZ M.Ş., The evaluation of stone column and jet grouting soil improvement with seismic refraction method: Example of Poti (Georgia) railway, International Journal of the Physical Sciences Vol. 6(28), pp. 6565 - 6571, 9 November, 2011

ALKAYA D., ÇOBANOĞLU İ,, YEŞİL B. The effect of geological and geotechnical factors on the project design of coastal structures(Alanya Marina case study), International Journal of the Physical Sciences Vol. 6(22), pp. 5243-5252, 2 October, 2011

ALKAYA D., ESENER B.A., Usability of sand-bentonite-cement mixture in the construction of unpermeable layer, Scientific Research and Essays Vol. 6(21), pp. 4492-4503, 30 September, 2011

ALKAYA D., YEŞİL B., Grouting applications of grout curtains in Cindere dam and hydroelectric power plant, Scientific Research and Essays Vol. 6(19), pp. 4039-4047, 8 September, 2011

ALKAYA, D., ÇOBANOĞLU, İ., YEŞİL, B., 2011. An application of grout curtains to the Dalaman – Akköprü Dam. International Journal of the Physical Sciences, Vol 6 (10), pp. 2405 – 2413.

ALPASLAN, H., YUCE, E.: ‘Bandwidth expansion methods of inductance simulator circuits and voltage-mode biquads’, Journal of Circuits, Systems, and Computers, vol. 20, no. 3, pp. 557-572, 2011

ALPASLAN, H., YUCE, E.: ‘Current-mode Biquadratic Universal Filter Design with Two Terminal Unity Gain Cells’, Radioengineering' vol. 21, no. 1, pp. 304-311, 2012

ARGUN H, KARGI F. Bio-hydrogen production by different operational modes of dark and photo fermentation: An overview. International Journal of Hydrogen Energy. 2011; 36 (13): 7443-7459.  

ARGUN H. Advanced Oxidation of Reactive Blue 221 by Fenton’s Process. J. Adv. Oxid. Technol. 2012; Vol. 15, No. 2. p: 340-347.

ARSLAN S. , TOPCU A.,  SALDAMLİ I., KOKSAL, G. Use of corn oil in the production of Turkish white cheese. J Food Sci Technol DOI 10.1007/s13197-012-0752-6

ARSLANALP, R., TOLA, A. T., YUCE, E., ‘Novel Resistorless First-Order Current-Mode Universal Filter Employing a Grounded Capacitor’, Radioengineering' vol. 20, no. 3, pp. 656-665, SEP 2011

BACANLI UG. “Dryness Characterızatıon: A Clımatıc Water Defıcıt Approach In Turkey” Fresenius Environmental Bulletin. Vol. 20, No:3. 665-677, 2011

BACANLI UG., DIKBAS F, BARAN, T. “Meteorological Drought Analysis Case Study: Central Anatolia” Desalination and Water Treatment. 26(2011)14-23.

BASKAN O. Harmony search algorithm for continuous network design problem with link capacity expansions, KSCE Journal of Civil Engineering, under review, 2011

BASKAN O., HALDENBİLEN S.,CEYLAN H., CEYLAN H. Estimating transport energy demand using ant colony optimization, Energy Sources Part B, 7(2), 188-199. , 2012

BAŞKAN Ö., OZAN C., HALDENBİLEN S., CEYLAN H. Modified reinforcement learning algorithm for finding global optimum, Applied Mathematics  and Computation, under review, 2011

BİLGİÇLİ, N., ERTAŞ, N., HERKEN, E., "Effects of Gluten and Emulsıfıer Addıtıon on Some Propertıes of Erışte Enrıched wıth Common Bean Flours", International Journal of Food Sciences and Nutrition (ISI) , 63-70 pp., 2011 , DOI: 10.3109/09637486.2010.506433.

BİLGİN, M.B., MERAN, C., The Effect of Tool Rotational and Traverse Speed on Friction Stir Weldability of AISI 430 Ferritic Stainless Steels, Materials and Design, Volume 33, January 2012, Pages 376-383.

BİLİCİ BASKAN, M., PALA, A., 2011. Removal of arsenic from drinking water using modified natural zeolite. Desalination, 281, 396 – 403.

BİNİCİ H, GEMCİ R, KAPLAN H Physical and Mechanical properties of mortar without cement, Construction and Building Materials, 28 (2012) 357–36.

BİNİCİ H, KAPUR S, AROCENA J, KAPLAN H The sulphate resistance of cements containing red brick dust and ground basaltic pumice with sub-microscopic evidence of intra-pore gypsum and ettringite as strengtheners, Cement and Concrete Composites, 34 (2012) 279–287.

BÜLBÜL., A, ÖZEN, T. and TARCAN, G. “Hydrogeochemical and Hydrogeological Investigations of Thermal Waters in The Alaşehir-Kavaklıdere Area (Manisa-TURKEY)”, DOI: 10.5897/AJB11.3050, NOV, 2011.

CAKAL G., GOGEBAKAN Z., COSKUN S., (2011), Investıgatıon of Synergistic Effect of Boron on Fire Retardancy of Cotton Fabrics Tekstil ve Konfeksiyon Dergisi, No: 3/2011, 265-271. (indeks: SCI Expanded)

CANYURT, O.E., MERAN, C.,  Fatigue Strength Estimation of Adhesively Bonded Tongue and Groove Joint of Thick Woven Composite Sandwich Structures using Genetic Algorithm Approach, The International Journal of Adhesion & Adhesives, 33(2012), 80–88.

CENK OZAN, SONER HALDENBİLEN, HALİM CEYLAN. "Estimating emissions on vehicular traffic based on projected energy and transport demand on rural roads: Policies for reducing air pollutant emissions and energy consumption", Energy Policy 39, 2542-2549 , 2011

CETİN, E., YİLANCİ, A., OZTURK, H. K., KASİKCİ, I., COLAK, M., ICLİ, S., 2011, Construction of a Fuel Cell System with DC Power Distribution for Residential Applications, International Journal of Hydrogen Energy, 36(17), 11474-11479.

CETİN, E., YİLANCİ, A., OZTURK, H. K., UCKAN, G., HEKİM, M., COLAK, M., ICLİ, S., 2011, Lightning Protection for Buildings Energized by Renewable Energy Sources, Elektronika IR Elektrotechnika (Electronics and Electrical Engineering), 6(112), 7-10.

CEYLAN H., CEYLAN H. (2012) A Hybrid Harmony Search and TRANSYT Hill Climbing Algorithm for Signalized Stochastic Equilibrium Transportation Networks, Transportation Research Part-C (doi. 10.1016/j.trc.2012.05.007).

CEYLAN H., HALDENBİLEN S., CEYLAN H., BASKAN O. Development of Delay Models with Quasi-Newton Method Resulting From TRANSYT Traffic Model, Journal of Scientific and Industrial Research, 69(2), 87-93 , 2010

CUKURLUOGLU, S. AND MUEZZINOGLU, A. 2012. Assessment of toxicity in waters due to heavy metals coming from atmospheric deposition using Vibrio fischeri. Journal of Environmental Science and Health, Part A, Toxic/Hazardous Substance & Environmental Engineering (accepted).

ÇALLIOĞLU H., BEKTAŞ N.B., SAYER M., “Stress Analysis of Functionally Graded Rotating Discs: Analytical and Numerical Solutions”, Acta Mechanica Sinica, 27(6):950–955, (2011).

ÇELİK İ., IŞIK F., GURSOY O., YILMAZ Y. 2012. Use of Jerusalem Artichoke (Helianthus Tuberosus) Tubers as a natural source of Inulin in Cakes. Journal of Food Processing and Preservation.

ÇİNER  F., GÖKKUŞ Ö., , “Treatability of Dye Solutions Containing Disperse Dyes by Fenton And Fenton-Solar Light Oxidation Processes”, CLEAN - Soil, Air, Water, DOI: 10.1002/clen.201000500 (2012).

ÇOBANOĞLU, İ., ALKAYA, D., 2011. Seismic risk analysis of Denizli (Southwest Turkey) region using different statistical models. International Journal of the Physical Sciences, Vol 6 (11), pp. 2662 – 2670.

ÇOBANOĞLU, İ., ÇELİK, S.B., 2012. Determination of strength parameters and quality assessment of Denizli Travertines (SW TURKEY), Engineering Geology, Vol. 129-130, 38-47.

D. TÜRKMEN Ö SOYKASAP, AND Ş. KARAKAYA “Development of Full-Scale Ultrathin Shell Re?ector” International Antennas and Propagation  Article Number: 829780   DOI: 10.1155/2012/829780   Published: 2012.

DANIS, M.E., ORHAN, M., AND ECDER, A., “Numerical Analysis of Transient Natural Convection using Smoothed Particle Hydrodynamics Technique on Uniform Grids,” Communications in Computational Physics, Yayınlanmak üzere gönderildi, incelemede.

DEMİR L., TUNALİ S., ELİİYİ D.T., (2012) "An adaptive tabu search approach for buffer allocation problem in unreliable non-homogenous production lines", Computers & Operations Research, 39 (7), 14778211;1486.

DEMİRAY, E., TULEK, Y., 2012. Thin-layer drying of tomato (Lycopersicum esculentum Mill. cv. Rio Grande) slices in a convective hot air dryer. Heat and Mass Transfer 48: 841-847.

DEMİRDAĞ O. VE YEŞİLCE Y. “Solution of free vibration equation of elastically supported Timoshenko columns with a tip mass by differential transform method” Advances in Engineering Software, 42, pp:860-867, 2011.

DIKBAS, F.; FIRAT, M.; KOC, A. C.; GUNGOR, M., “Classification of Precipitation Series Using Fuzzy Cluster Method”, International Journal of Climatology, DOI: 10.1002/joc.2350, (2011).

E. TAN, A. R. TARAKCILAR, D. DIŞPINAR, “Correlation Between Melt Quality and Fatigue Properties of 2024, 6063 and 7075”, 141st TMS Annual Meeting (TMS2012), Materials Properties, Characterization, and Modeling, March 11-15, 2012, Orlando, Florida, US, p. 479-485.

E. TAN, A. R. TARAKCILAR, D. DIŞPINAR, “Defect Analysis by Casting Simulation Software in Rolling Roll Manufactured by GGG70”, 141st TMS Annual Meeting (TMS2012), CFD Modeling and Simulation in Materials, March 11-15, 2012, Orlando, Florida, US, p. 213-218.

E. TAN, A. R. TARAKCILAR, D. DIŞPINAR, “Quench Sensitivity of 2024, 6063 and 7075”, 141st TMS Annual Meeting (TMS2012), Materials Properties, Characterization, and Modeling, March 11-15, 2012, Orlando, Florida, US, p. 185-191.

E. TAN, A. R. TARAKCILAR, F. SYVERTSEN, D. DIŞPINAR, “Optimisation of Tensile Test Pattern For Aluminium Alloys”, 141st TMS Annual Meeting (TMS2012), CFD Modeling and Simulation in Materials, March 11-15, 2012, Orlando, Florida, US, p. 179-185.

E. TAN, A. R. TARAKCİLAR, D. DISPINAR, Blistering Problems Observed in Strain Induced Melt Activated Aluminium Alloys, Trans Indian Inst Met, Dec. 2011, Volume: 64  Issue: 6  Pages: 555-563  DOI: 10.1007/s12666-011-0098-1

E. TAN, A. R. TARAKCİLAR, D. DISPINAR, Effect of Melt Quality and Quenching Temperature on The Mechanical Properties of SIMA 2024 and 7075, Advanced Materials Research, Vol. 445, (2012), 171-176, Online available since 2012/Jan/24 at www.scientific.net © (2012) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/AMR.445.171

EKREN, O., YİLANCİ, A., OZTURK, H. K., CETİN, E., 2011, Experimental Performance Evaluation of a PV-Powered Refrigeration System, Elektronika IR Elektrotechnika (Electronics and Electrical Engineering), 8(114), 7-10.

ELMAS, N., KUMRAL, M., SUNER, F., TAŞDELEN, S., 2012, Stratiform barite deposits hosted in metamorphic assamblages of Dinek and surrounding regions, Isparta, Turkey, Journal of Asian Earth Sciences.

ERGİN, A., HERKEN E.N., "Use of various flours in gluten-free biscuits", Journal of Food, Agriculture & Environment , 128-131 pp., 2012 , DOI: WOS:000300924100026

ERGUN EMİN; TOPÇU MUZAFFER; TASGETİREN SULEYMAN, An Experimental Study on the Fatigue of Cracked Aluminum Plate with Composite Patches Under Varied Temperatures, JOURNAL OF COMPOSITE MATERIALS  Volume: 45   Issue: 3   Pages: 341-355 , 2011

ERGUN, S., KARAKAYA, Ş., TARAKCILAR, A. R., ERGUN, E., “Effects of geometric parameters on failure behavior in joined-rivet and single lap laminated composite plate under bending moment”, Scientific Research and Essays, 6(26), 5475–5485, 2011.

FIRAT M., DİKBAŞ F., KOÇ A.C., GÜNGÖR M., “K Ortalamalar Yöntemi ile Yıllık Yağışların Sınıflandırılması ve Homojen Bölgelerin Belirlenmesi”. İMO Teknik Dergi, 2012, 6037-6050.

FIRAT, M.; DIKBAS, F.; KOC, A. C.; GUNGOR, M., “Analysis of Temperature Series: Estimation of Missing Data and Homogeneity Test”, Meteorological Applications, DOI: 10.1002/met.271, (2011).

FORİSZ I. KELE S. DEAK J. GÖKGÖZ A. ÖZKUL M. BAYKARA M.O. ALÇİÇEK M.C. 2011. Comparison of the isotope hydrogeological features of thermal and cold karstic waters in the Denizli Basin (Turkey) and Buda Thermal Karst (Hungary). Central European Geology 54, 115-119

G. ERDEN, A. FİLİBELİ,"Effects of Fenton Pre-treatment on Waste Activated Sludge Properties", CLEAN- Soil, Air, Water,39/7/626-632-2011.

G. ERDEN, A. FİLİBELİ,"Ozone Oxidation of Biological: Effects on Floc Disintegration, Solubilization and Cell Lysis", Environmental Progress & Sustainable Energy, 30/3/259-262-2011.

GOLCU MUSTAFA; KOSEOGLU MEHMET FEVZI, Source: Isi Bilimi Ve Teknigi Dergisi-Journal Of Thermal Science And Technology  Volume: 32   Issue: 1   Pages: 33-40   Published: 2012.

GÖLGELİOGLU, C.; BAYRAKTAR, A.; CELEBİ, B.; UĞUZDOĞAN, E.; TUNCEL, S.A. Aqueous size exclusion chromatography in semimicro and micro-columns by newly synthesized monodisperse macroporous hydrophilic beads as a stationary phase. JOURNAL OF CHROMATOGRAPHY A 1224, 43-50 Feb 2012.

GÖRGÜLÜ, T., TAMA, Y. S., YILMAZ, S., KAPLAN, H., ZEKİ AY, “Strengthening Of Reinforced Concrete Structures With External Steel Shear Walls”, Journal of Constructional Steel Research, Volume.70, P:226-235, March 2012.

GURARSLAN, G. VE SARİ, M., “Numerical Solutions of Linear and Nonlinear Diffusion Equations by a Differential Quadrature Method (DQM)”, International Journal for Numerical Methods in Biomedical Engineering (Communications in Numerical Methods in Engineering), 27, 69-77, 2011.

GURBUZ, A., ONAR, N., OZDEMİR, I., KARAOGLANLİ, A.C., CELİK, E., Structural, Thermal and Magnetic Properties of Barium-Ferrite Powders Substituted with Mn, Cu or Co and X (X = Sr and Ni) Prepared by the Sol-Gel Method, Materiali in tehnologije / Materials

H. KAPLAN, S. YILMAZ, N. CETİNKAYA, E. ATIMTAY, Seismic strengthening of RC structures with exterior shear walls, Sadhana - Academy Proceedings in Engineering Science, 36(1), 17-34, 2011.

H. ÜN, B. BARADAN (2011) “The Effect of Curing Temperature and Relative Humidity on The Strength Development Of Portland Cement Mortar” Scientific Research and Essays, Vol. 6(12), pp. 2504-2511, 18 June, 2011

H.Y. ODABASOGLU, O. BÜYÜKGÜNGÖR, O. AVİNÇ, M. ODABASOGLU, “(E)-2-{[(2-(Trifluoromethyl)phenyl]iminomethyl}phenol”, Acta Crystallographica Section E, Structure Reports Online, March 2012, Volume 68, Part 3, E68, o578.

H.Y. ODABASOGLU, O. BÜYÜKGÜNGÖR, O. AVİNÇ, M. ODABASOGLU, “2-Amino-3-(hydroxymethyl)pyridinium 2-benzoylbenzoate monohydrate”, Acta Crystallographica Section E, Structure Reports Online, March 2012, Volume 68, Part 3, E68, o707-o708.

H.Y. ODABASOGLU, O. BÜYÜKGÜNGÖR, O. AVİNÇ, M. ODABASOGLU, “2-Amino-5-nitrobenzoic acid”, Acta Crystallographica Section E, Structure Reports Online, February 2012, Volume 68, Part 2, E68, o511.

HACER GÜNER GÖREN, SEMRA TUNALI, RAF JANS. "A hybrid approach for the capacitated lot sizing problem with setup carryover", International Journal of Production Research, 50 (6), 1582-1597, 15 March 2012

HASAN ÇALLIOĞLU, GÖKMEN ATLIHAN AND MUZAFFER TOPÇU, “Vibration Analysis of Multiple Delaminated Composite Beams”, Advanced Composite Materials, 21, 11–27, (2012).

HASAN ÇALLIOĞLU, METIN SAYER AND ERSIN DEMİR, “Impact Behavior of Particles Filled-Glass/Polyester Composite Plates”, POLYMER COMPOSITES, 32(7) 1125-1133 (2011).

HELVACI C. ALÇIÇEK M.C. GÜNDOĞAN İ. GEMICI Ü. 2013. Tectonosedimentary development and palaeoenvironmental changes in the Acıgöl shallow-perennial playa-lake basin, SW Anatolia, Turkey. Turkish Journal of Earth Sciences doi: 10.3906/ yer-1112-5

HERKEN, E. N., ÇON, A. H. ., "Use of different lactic starter cultures in the production of tarhana", Journal of Food Processing and Preservation (ISI) , 2012.

HİLMİ YAZİCİ, MEHMET AKÇAY, MUSTAFA GÖLCÜ, MEHMET FEVZİ KÖSEOĞLU, YAKUP SEKMEN, Experimental Investigation of the Transient Cooling, Characteristics of an Industrial Glass Tempering Unit, Pamukkale University, Turkey WASET 2012 ZURICH, SWITZERLAND, INTERNATIONAL CONFERENCE, January 15-17, 2012 Geroldswil Swiss Quality Hotel Huebwiesenstrasse 36 Geroldswil , Zurich, Switzerland.

HONG, X., IPLİKCİ, S., CHEN, S., AND WARWİCK, K., A model based PID controller for Hammerstein systems using B-spline neural networks, International Journal of Adaptive Control and Signal Processing, doi:10.1002/acs.2293. (2012).

IBRAHIM, M. A., MINAEI, S., YUCE, E., ‘All-Pass Sections with Rich Cascadability and IC Realization Suitability’, International Journal of Circuit Theory and Applications, vol. 40, pp. 461–472, 2012

IBRAHIM, M. A., MINAEI. S., YUCE, E., ‘All-Pass Sections with High Gain Opportunity’, Radioengineering, vol. 20, no. 1, pp. 3-9, 2011.

IBRAHIM, M. A., MINAEI. S., YUCE, E., N. HERENCSAR, J. KOTON, ‘Lossy/Lossless Floating/Grounded Inductance Simulation Using One DDCC’, Radioengineering' vol. 21, no. 1, pp. 3-10, 2012

ISMAIL OZDEMIR, CEREN GODE, HAKAN YILMAZER, HASAN CALLIOGLU, “The effect of extrusion and high-pressure torsion on the properties of Alumix-231”, Materials Science and Engineering A, 532, 573– 578, (2012).

IŞIK, M., ATLAŞ, L., ÖZCAN, S., ŞİMŞEK, İ., AĞDAĞ, O.N., ALAŞ, A., 2012. Effect of urea concentration on microbial Ca precipitation, Journal of industrial and engineering chemistry (in press)

İKİZ Y., KESKİN R., Fastness and PF/3 Evaluations of Reactive Dyestuffs, scientific Research and Essays, vol 6, issue 7, 2011.

İPLİKÇİ, S., Runge-Kutta Model Based Adaptive Predictive Control Mechanism for Nonlinear Processes, Transactions of the Institute of Measurement and Control, doi:10.1177/0142331212438910. (2012)

KADAKAL, Ç, 2012. A survey of ergosterol content of tomato products in Turkey during 2006-2010. İtalian Journal of Food science, 24:1-6 

KADAKAL, Ç. 2012.  Effects of temperature and packaging types on ergosterol and Howard Mould Count (HMC) of tomato paste during storage. Journal of Food Science and Technology(Basımda)

KAMAN, M.,O., CETİSLİ, F., “Numerıcal Analysıs of Center Cracked Orthotropıc fgm plate: crack and materıal axes dıffer by ?o”, Steel and Composite Structures, 2012, Accepted (Kabul edildi)

KARAALP, H. S., YİLMAZ, N. D., Assessment of Trends in the Comparative Advantage and Competitiveness of the Turkish Textile and Clothing Industry in the Enlarged EU Market, Fibres and Textiles in Eastern Europe, 92, 3, 2012, s. 8-11.

KARABACAK, R., GÜVEN ACAR, Ş., KUMSAR, H., GÖKGÖZ, A., KAYA, M., TÜLEK,Y., “Experimental Investigation of The Cooling Performance of a Ground Source Heat Pump System in Denizli, Turkey” International Journal of Refrigeration, 34 (2), 454-465 (2011).

KARABACAK,R., YAKAR, G., Forced Convection heat transfer and pressure drop  for a horizontal cylinder with vertically attached imperforate and perforated circular fins, Energy Conversion and Management, Vol:52, pp:2785-2793, 2011.

KARACA H., SMİLANİCK J.L. 2011. The Influence of Plastic Composition and Ventilation Area on Ozone Diffusion through Some Food Packaging Materials. Postharvest Biology and Technology, 62(1): 85-88.

KARACA H., WALSE S.S., SMİLANİCK J.L. 2012. Effect of Continuous 0.3 µL/L Gaseous Ozone Exposure on Fungicide Residues on Table Grape Berries. Postharvest Biology and Technology, 64(1): 154-159.

KARAHAN, H.,  GURARSLAN G. AND GEEM, Z.W.  “Parameter Estimation of the nonlinear Muskingum flood routing model using a hybrid harmony search algorithm”, Journal of Hydrologic Engineering, doi:10.1061/(ASCE)HE.1943-5584.0000608, 2012.

KARAHAN, H., "Determining Rainfall-Intensity-Duration-Frequency Relationship Using Particle Swarm Optimization, KSCE Journal of Civil Engineering, 16(4), 667-675, 2012.

KARAHAN, H., "Predicting Muskingum flood routing parameters using spreadsheets", Computer Applications İn Engineering Education, 20(2), 280-286, 2012.

KARAHAN, H., Discussion of “Parameter Estimation of Nonlinear Muskingum Models Using Nelder-Mead Simplex Algorithm” by Reza Barati, Journal of Hydrologic Engineering, doi: 10.1061/(ASCE)HE.1943-5584.0000667, 2012.

KARAKAŞ, Ö., ‘‘Estimation of Fatigue Life for Aluminium Welded Joints with the Application of Artificial Neural Networks’’, Materialwissenschaft und Werkstofftechnik, Cilt 42-10, p.888-893, 2011.

KAYA T. MAYDA S. KOSTOPOULOS D. ALÇIÇEK M.C. MERCERON G. TAN A. KARAKÜTÜK S. GIESLER A.K. SCOTT S.S. 2012. Şerefköy-2, a new late Miocene mammalian locality from the Yatağan Formation, Muğla, SW Turkey. Comptes Rendus Palevol 11, 5-12

KAYABALİ, K., BEYAZ, T., 2011. Strong motion attenuation relationship for Turkey-a different perspective. Bulletin of Engineering Geology and the Environment, V: 70(3), p: 467-481. DOI: 10.1007/s10064-010-0335-6.

KAYHAN A.H. (2012) Armoni araştırması ile ivme kaydı seçimi ve ölçeklendirme, İMO Teknik Dergi, 23(1): 5751-5775.

KAYHAN A.H., KORKMAZ K.A., IRFANOGLU A. (2011) Selecting and scaling real ground motion records using harmony search algorithm, Soil Dynamics and Earthquake Engineering, 31: 941-953.

KAZANCI N. BOYRAZ S. ÖZKUL M. ALÇIÇEK M.C. KADIOĞLU Y.K. 2012. Late Holocene terrestrial tephra record at western Anatolia, Turkey: possible evidence of an explosive eruption outside Santorini in the eastern Mediterranean. Global and Planetary Change 80, 36-50

KELE, S., ÖZKUL, M., FÓRİZS, I., GÖKGÖZ, A., BAYKARA, M.O., ALÇİÇEK, M.C., NÉMETH, T.,2011. Stable isotope geochemical study of Pamukkale travertines: New evidences of low-temperature non-equilibrium calcite-water fractionation. Sedimentary Geology, 238, 191-212.

KIVRAK, S., GUNDUZALP, M., DINCER, F., - Theoretical and experimental performance investigation of a twoaxis solar tracker under the climatic condition of Denizli, Turkey,PRZEGLAD ELEKTROTECHNICZNY (Electrical Review) Vol 2012, No 2 , 2012

KORALAY, T., ÖZKUL, M., KUMSAR, H., CELİK, S.B., PEKTAS, K., 2011. The effect of welding degree on geotechnical properties of an ignimbrite flow unit: the Bitlis castle case (eastern Turkey). Environmental Earth Science, 64, 869–881.

KOROGLU S.,  SERGEANT P., SABARİEGO R.V., DANG V.Q. AND WULF M. DE,  “In?uence of contact resistance on shielding ef?ciency of shielding gutters for high-voltage cables”, IET  Electrıc Power Applıcatıons, Vol. 5, Iss. 9, pp. 715–720, 2011

KULAK O., POLAT O., GUJJULA R., GÜNTHER H.O. Strategies for improving a long-established terminals performance: A simulation study of a Turkish container terminal, Flexible Services and Manufacturing Journal, DOI: 10.1007/s10696-011-9128-X, (2011).

KULAK O., SAHİN Y., TANER M.E. Joint order batching and picker routing in single and multiple-cross-aisle warehouses using cluster-based tabu search algorithms, Flexible Services and Manufacturing Journal, 24:13, (2012)

KURSUN ALİ; TOPCU MUZAFFER; TETİK TUGBA, Stress Analysis of Functionally Graded Disc under Thermal and Mechanical Loads, 11th International Conference on the Mechanical Behavior of Materials (ICM) Location: Como, ITALY Date: 2011

KURŞUN, A., ŞENEL, M. (2011), Investigation of the Effect of Low-Velocity Impact on Composite Plates with Preloading, Experimental Techniques 35 (2), 1-8.

KURŞUN, A., TOPÇU, M. (2012), Thermal stress analysis of functionally graded disc with variable thickness due to linearly increasing temperature loads, AJSE, (kabul).

KURŞUN, A., TOPÇU, M., TETİK, T. (2011), Stress Analysis of Functionally Graded Disc     under Thermal and Mechanical Loads,ICM11, 5th-9th June 1011, (in Italy)

KURŞUN, A., TOPÇU, M., YÜCEL, U. (2012), Stress Analysis of a Rotating FGM Circular Disc with Exponentially-Varying Properties, ASME 2012 International Mechanical Engineering Congress & Exposition, November 9th -15th 2012 HOUSTON, TEXAS (Kabul)  (in USA).

LUİGİ DE FİLLİPPİS, FACCENNA, C. , BİLLİ A. , ANZALONE, E. , BRİLLİ, M., ÖZKUL, M., SOLİGO M., TUCCİMEİ, P.  AND M. VİLLA, I., 2012. Growth of fissure ridge travertines from geothermal springs of Denizli Basin, western Turkey. Bulletin of Geological Society of America, v. 124, no. 7-8; doi: 10.1130/B30606.1

MERAN, C., YÜKSEL, M., Usability of Boron as an Alloying Element in Gray Cast Iron Rollers and Its Effect to Abrasive Wear Behaviour, 14th International Conference on Advances in Materials and Processing Technologies (AMPT), 2011, 13-16 July 2011, Istanbul (AMR'de makale olarak basıldı).

MERAN, C., YÜKSEL, M., Usability of Boron as an Alloying Element in Gray Cast Iron Rollers and Its Effect to Abrasive Wear Behaviour, Advanced Materials Research, Vol 445, pp331-336, 2012.

METIN SAYER, NUMAN BEHLÜL BEKTAŞ, ERSIN DEMIR, HASAN ÇALLIOĞLU, “The effect of temperatures on hybrid composite laminates under impact loading”, Composites: Part B, 43, 2152–2160, (2012).

METİN SAYER, NUMAN BEHLÜL BEKTAŞ, HASAN ÇALLIOĞLU, ERSİN DEMİR, “ The Effect of Temperatures on Hybrid Composite Laminates Under Impact Loading", JCOMB, Accepted,(2011).

MINAEI, S., YUCE, E., ‘A Simple CMOS-based Inductor Simulator and Frequency Performance Improvement Techniques’, online published, .AEU - International Journal of Electronics and Communications, 2012

MINAEI, S., YUCE, E., ‘High Input Impedance NMOS-based Phase Shifter with Minimum Number of Passive Elements’, Circuits, Systems and Signal Processing (CSSP), vol. 31, pp. 51–60, 2012

MINAEI. S., YUCE, E., ‘A Simple Schmitt Trigger Circuit with Grounded Passive Elements and Its Application to Square/Triangular Wave Generator’, Circuits, Systems and Signal Processing, vol. 40, pp. 461–472, 2012

MURAT, Y.Ş., (2011) “An Entropy (Shannon) based Traffic Safety Level Determination Approach for Black Spots” Procedia, Social and Behavioral Sciences, Vol.20, pp 786-795. Elsevier Publishing. http://dx.doi.org/10.1016/j.sbspro.2011.08.087

MUTLU OZTURK, H., OZTURK, H.K., KOCAR, G.,Comparison of Vacuum Cooling with Conventional Cooling for Purslane, International Journal of Food Engineering,Vol. 7, I: 6, 2011.

MUTLU Ö., ÖZGÖRMÜŞ E. (2012) "A fuzzy assembly line balancing problem with physical workload constraints" International Journal of Production Research  (Accepted for the publication)

MUTLU Ö., POLAT O., SUPCİLLER A.A "An iterative genetic algorithm for the assembly line worke rassignment and balancing problem of type-II" Computers and Operations Research (2012)

MYDERRIZI, I, MINAEI. S., YUCE, E., ‘An Electronically Fine Tunable Multi-Input Single-Output Universal Filter’, IEEE Transactions on Circuits and Systems-Part-II: Express Briefs (TCAS-II), vol. 58, no. 6, pp. 356-360, 2011

MYDERRIZI, I, MINAEI. S., YUCE, E., ‘DXCCII-Based Grounded Inductance Simulators and Applications’, Microelectronics Journal, vol. 42, no. 9, pp. 1074-1081, 2011

OZAN AVİNC, HÜSEYİN AKSEL EREN, PINAR UYSAL, MİKE WİLDİNG, “The effects of ozone treatment on soybean fibres”, Ozone: Science and Engineering, May-June 2012, 34, 143-150.

OZAN AVİNC, REBECCA DAY, CHRİS CARR, MİKE WİLDİNG, “Effect of combined flame retardent, liquid repellent and softener finishes on poly(lactic acid) (PLA) fabric performance”, Textile Research Journal, 2012, 82, 10, 975–984.

OZAN C., BAŞKAN Ö., HALDENBİLEN S., CEYLAN H., A reinforcement learning based algorithm for area traffic control, Applied Mathematics  and Computation, under review, 2012

OZAN, C., BAŞKAN Ö., HALDENBİLEN, S. AND CEYLAN, H., “A reinforcement learning based algorithm for solving area traffic control problem”, Applied Mathematics and Computation, under review.

Ö SOYKASAP, Ş. KARAKAYA AND D. TÜRKMEN “Curved large tape springs for an ultra-thin shell deployable reflector” Journal of Reinforced Plastics Composites, Volume 31 Number 10 May 2012.

Ö SOYKASAP, Ş. KARAKAYA AND D. TÜRKMEN “Manufacturing Of Thin-Shell Ofset, Demonstrator Reflector” Advanced Materials Research Vol. 445 (2012) pp 514-519.

ÖZGÜNEY, A.T., UTEBAY B., ÖZERDEM, A., 2012, Investigation of the usage of different thickening agents in the pretreatment in ink-jet printing with reactive dyes,  Industria Textila, Vol. 63, No. 1, 85-90, 2012

PALAMUTCU S., ACAR G., CON A.H:, GULTEKİN T., AKTAN B., SELCUK H., Innovative Self-Cleaning and Antibacterial Cotton Textile: No water and No Detergent for Cleaning, Desalination and Water Treatment, vol 26, issue 1-3, pp 178-184, 2011.

PAN, S., İPLİKCİ, S., WARWİCK, K., AND AZİZ T.Z., Parkinson’s Disease tremor classification – A comparison between Support Vector Machines and neural networks, Expert Systems with Applications, 39, 10764-10771 (2012).

SARİ, M. VE GURARSLAN, G., “A Sixth-Order Compact Finite Difference Method for the One-Dimensional Sine-Gordon Equation”, International Journal for Numerical Methods in Biomedical Engineering (Communications in Numerical Methods in Engineering), 27, 1126-1138, 2011.

SARİ, M., GURARSLAN, G. VE ZEYTİNOGLU, A., “High-Order Finite Difference Schemes for Numerical Solution of the Burgers-Huxley Equation”, Numerical Methods for Partial Differential Equations, 27, 1313-1326, 2011.

SARİ, M., GURARSLAN, G. VE ZEYTİNOGLU, A., “High-Order Finite Difference Schemes for the Solution of the Generalized Burgers-Fisher Equation”, International Journal for Numerical Methods in Biomedical Engineering (Communications in Numerical Methods in Engineering), 27, 1296-1308, 2011

SARİ, M., GÜNAY, A. VE GURARSLAN, G., “Approximate Solutions of Linear and Nonlinear Diffusion Equations by Using Daftardar-Gejji-Jafari’s Method”, International Journal of Mathematical Modelling and Numerical Optimisation, 2 (4), 376-386, 2011.

SELCUK, L., SELCUK-SAGLAM, A., BEYAZ, T., 2010. Probabilistic seismic hazard assessment for Lake Van basin, Turkey. Natural Hazards, V: 54 (3), p: 949-965. DOI: 10.1007/s11069-010-9517-6.

SEMIZ, B., ÇOBAN, H., RODEN, M.F., ÖZPINAR, Y., FLOWER, M.F.J.,& MCGREGOR, H., 2012. Mineral composition in cognate inclusions in Late Miocene–Early Pliocene potassic lamprophyres with affinities to lamproites from the Denizli region, Western Anatolia, Turkey: Implications for uppermost mantle processes in a back-arc setting. Lithos, 134-135, 253-272.

SEN S, SEZER EA, GÖKÇEOĞLU C, YAĞIZ S. 2012. On sampling strategies for small and continuous data with the modeling of Genetic Programming and ANFIS. Journal of Intelligent & Fuzzy Systems, (special publication), (kabul edildi)

SOLMAZ AKAL, S.K., ÜSTÜN, G.E., ÇİNER, F., “Treatability Studies for an Organized Industrial District (OID) Effluent in Bursa, Turkey For Agricultural Irrigation Purposes”, Desalination and Water Treatment, 33(1-3),156-163,DOI:10.5004/dwt.2011.2626 (2011).

SOLMAZ AKAL, S.K., ÜSTÜN, G.E., ÇİNER, F., BAŞKAYA, H., “Tertiary Treatment of a Secondary Effluent by the Coupling of Coagulation- Flocculation-Disinfection for Irrigation Reuse”, Desalination, 277, 207-212 (2011).

SULPLIZZO R. ALÇIÇEK M.C. ZENCCATO G. SOLTERRI L. 2012. Recognition of the Santorini event in the west Turkey: implications for inter archive correlations and fine ash dispersal. Quaternary International (accepted)

ŞENEL Ş.M., PALANCİ M. (2011), “Structural Aspects and Seismic Performance of One Story Precast Buildings in Turkey”, J. Perform. Constr. Facil., Nov.2011

T. GÖRGÜLÜ, Y.S. TAMA, S. YILMAZ, H. KAPLAN, Z. AY, Strengthening of Reinforced Concrete Structures With External Steel Shear Walls, Journal of Constructional Steel Research, 70, 226-235, 2012.

TOPALOGLU S., SALUM L., SUPCİLLER A.A. Rule-based modeling and constraint programming based solution of the assembly line balancing problem. Expert Systems with Applications, Volume 39, pages 3484-3493, 2012.

TURHAN Y., EREN R., The Effect of Loom Settings on Weavability Limits on Air-jet Weaving Machines, Textile Research Journal, vol 82, issue 2, pp 172-182, 2012.

TÜLEK,Y., “Drying Kinetics of Oyster Mushroom (Pleurotus ostreatus) in a Convective Hot Air Dryer” J. Agricultural Science and Technology, 13 (5), 655-664 (2011).

TÜRKYILMAZ, M., YEMİŞ, O., ÖZKAN, M. 2012. Clarification and pasteurisation effects on monomeric anthocyanins and percent polymeric colour of black carrot (Daucus carota L.) juice. Food Chemistry, 134(2), 1052-1058.

UĞUZDOĞAN, E.; DENKBAS, E.B.; KABASAKAL, O.S. Investigation of Temperature Sensitivity Behaviors of Water Soluble Polyacrylamides. JOURNAL OF APPLIED POLYMER SCIENCE DOI: 10.1002/app.38008 2012.

ULUKOY A.; TOPCU M.; TASGETİREN S., The effect of aging treatments on wear behavior of aluminum matrix functionally graded material under wet and dry sliding conditions, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK   Volume: 42    Issue: 9    Pages: 806-811, 2011.

USTA N., "Investigation of Fire Behavior of Rigid Polyurethane Foams Containing Fly Ash and Intumescent Flame Retardant by Using a Cone Calorimeter", Journal of Applied Polymer Science, 124, 3372–3382 (2012).

VIALET A. GUIPERT G. ALÇIÇEK M.C. 2011. Reconstitution 3D et étude de l’Homo erectus de Kocabaş en Turquie. Bulletins et mémoires de la Société d’Anthropologie de Paris 23, S38

VIALET A. GUIPERT G. ALÇIÇEK M.C. 2012. Homo  erectus  found  still  further  west:  Reconstruction  of  the  Kocabaş cranium  (Denizli, Turkey). Comptes Rendus Palevol 11, 89-95

WALSE S.S., KARACA H. 2011. Remediation of Fungicide Residues on Fresh Produce by Use of Gaseous Ozone. Environmental Science and Technology, 45(16): 6961-6969.

YAGİZ, S., AND KARAHAN, H., "Prediction Of Hard Rock TBM Penetration Rate Using Particle Swarm Optimization", International Journal Of Rock Mechanics And Mining Sciences,  48(3),427-433.,2011.

YAĞIZ S, SEZER EA, GOKCEOGLU C. 2012. Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks, International Journal for Numerical and Analytical Methods in Geomechanics, DOI: 10.1002/nag.1066.

YAĞIZ S. 2011. Comments on the article “Performance prediction of hard rock TBM using Rock Mass Rating (RMR) system” [TUST, 25 (2010) 333-345]. Tunneling and Underground Space Technology, 26, 649-650.

YAĞIZ S. 2011. Correlation between slake durability and rock properties for some carbonate rocks. Bulletin of Engineering Geology and the Environment, 70, 377-383.

YAĞIZ S. 2011. P-wave velocity test for the assessment of some geotechnical properties of rock materials. Bulletin of Materials Science, 34, 943-957

YAĞIZ S. 2012. Comments on "Determination of strength parameters and quality assessment of Denizli travertines (SW Turkey)" [Eng Geol, 129-130 (2012) 38-47]. Engineering Geology, (kabul edildi)

YAKAR, G., KARABACAK, R., Effects of Differant Fin Spacings on the Nusselt Number and Reynolds Number in Perforated Finned Heat Exchangers, Heat Transfer Engineering, vol:32, pp:399-407, 2011.

YAVAŞ A., ÖZGÜNEY A. T.,  ÇAY A., ÜTEBAY B., 2011, A Study on the Process Parameters of Discharge Printing of Cotton Fabrics, Tekstil ve Konfeksiyon, Sayı 4, 349-355

YEMİŞ, O., MAZZA G. 2012. Optimization of furfural and 5-hydroxymethylfurfural production from wheat straw by a microwave-assisted process. Bioresource Technology, 109, 215-223.

YILMAZ, N. D., BANKS-LEE, P., POWELL, N.B., MİCHİELSEN, S., Effects Of Porosity, Fiber Size And Layering Sequence On Sound Absorption Performance Of Needle-Punched Nonwovens, Journal of Applied Polymer Science, 121, 5, 2011, s. 3056-3069. DOI: 10.1002/

YILMAZ, N. D., MİCHİELSEN, S., BANKS-LEE, P., POWELL, N.B., Effects of Material and Treatment Parameters on Noise Control Performance of Compressed Three-Layered Multi-Fiber Needle-Punched Nonwovens, Journal of Applied Polymer Science, 123, 4, 2012, s.

YILMAZ, N.D., POWELL, N.B., BANKS-LEE, P., MİCHİELSEN, S., Hemp-fiber Based Nonwoven Composites: Effects of Alkalization on Sound Absorption Performance, Fibers & Polymers, 2012, basım aşamasında.

YILMAZ, N.D., POWELL, N.B., BANKS-LEE, P., MİCHİELSEN, S., Multi-Fiber Needle-Punched Nonwoven Composites: Effects of Heat Treatment on Sound Absorption Performance, Journal of Industrial Textiles, 2012, basım aşamasında, DOI: 10.1177/1528083712452899.

YUCE, E., ‘Reply to Comment on “Novel lossless and lossy grounded inductor simulators consisting of a canonical number of components”’ Online published in Analog Integrated Circuits and Signal Processing (ALOG), 2012

YUCE, E., ALPASLAN, H., ‘A CMOS Current Rectifier Configuration Suitable for Integration’, Accepted for publication in Journal of Circuits, Systems, and Computers (JCSC), 2012

YUCE, E., MINAEI, S., ‘Derivation of Low-Power First-Order Low-Pass, High-Pass and All-Pass Filters’, Analog Integrated Circuits and Signal Processing (ALOG) , vol. 70, pp. 151-156, 2012

YUCE, E., MINAEI, S., ALPASLAN, H., ‘Novel CMOS Technology-Based Linear Grounded Voltage Controlled Resistor’, Journal of Circuits, Systems, and Computers (JCSC), vol. 20, no. 3, pp. 447-455, 2011

YUCE, E., MINAEI. S., N. HERENCSAR, J. KOTON, ‘Realization of First-Order Current-Mode Filters with Low Number of MOS Transistors’, Accepted for publication in Journal of Circuits, Systems, and Computers (JCSC), 2012

YUCE, E., TOKAT, S., ‘CFOA Based Artificial Neuron Model Implementations’, Accepted for publication in Electronics World, 2012

YUCE, E.: ‘Multiplier, frequency doubler and squarer circuits based on voltage controlled resistors’, International Journal of Electronics and Communications (AEU), vol. 65, no. 3, pp. 244-249, 2011

YUCEL, F., ORAL, O., CAGLAYAN, N., TECIMEN, M. KOCAK, S., YUCE, E., ‘Design and Implementation of a Personal Computer Authorization System using Color Detection’, The journal of Electronics and Electrical Engineering' vol. 9, pp. 97-100, 2011