Sevilay Cetin, PhD

 

 

Associate Professor

Pamukkale University, Technology Faculty

Department of Biomedical Engineering

A0214, 20160 Pamukkale/Denizli

Phone: +90 258 296 41 52

E-Mail :  scetin@pau.edu.tr

Web    : http://www.pau.edu.tr/scetin

Orchid ID: https://orcid.org/0000-0002-9747-4821

Education and Experience

 

B. Sc.: Pamukkale University, Electrical-Electronics Engineering, Denizli, 1997-2001

M. Sc.: Pamukkale University, Electrical-Electronics Engineering, Denizli, 2002-2005

Ph. D.: Yildiz Technical University, Electrical Engineering, Istanbul, 2007-2011

Post-Doc: Rensselaer Polytechnic Institute, New York, USA, 2013-2014

 

Research Assistant, Pamukkale Univesity, Electrical Education, Denizli/Turkey, 2001-2007.

Research Assistant, Yıldız Technical University , Electrical Engineering, Istanbul/Turkey, 2007-2012.

Postdoctoral Research Associate, Rensselaer Polytechnic Institute, CFES, New York/USA, 2013-2014.

Assistant Professor, Pamukkale University, Biomedical Engineering, Denizli/Turkey, 2012-2017.

Associate Professor, Pamukkale University, Biomedical Engineering, Denizli/Turkey, 2017-Continue.

 

Research Area

Soft Switching Techniques

AC-DC, DC-DC Converters

Resonant Converters

Wireless Battery Charger Design

Power Factor Correction Techniques

Electrical Vehicle Battery Charger Design

High Efficiency High Power Density SMPS Design

Induction Heating Systems

 

 

Research Studies and Teaching Activities

 

International Journal Papers (SCI, SCI-E)

1. B.S. Sazak , S. Cetin, S. Oncu, "A Simplified Procedure For The Optimal Design of Induction Cooking Appliances", International Journal of Electronics, Volume:94, Issue:3, pp.197-208, March 2007.

2. S. Cetin, B.S. Sazak , "Triple Half Bridge Series Resonant Inverter for Home Cooking Applications", International Review of Electrical Engineering (IREE), Volume:4, Issue:2, pp.168-193, March-April 2009.

3. Yilmaz S., Sazak B.S., Cetin S., “Design and Implementation Web-Based Training Tool for A Single Switch Induction Cooking System Using PHP”, Electronics and Electrical Engineering, Volume:99, Issue:3, pp.89-92, 2010

4. Bodur H., Cetin S., Yanık G., “A New Zero-Voltage-Transition-PWM Boost Converter”, IET Power Electronics, Issue:4, Issue:7, pp.827-834, August 2011.

5. S. Cetin, H. Bodur, “Design and Simulation of A Fully Soft-Switched and Bridgeless Power Factor Correction Circuit”, Electronics World, Volume:118, Issue:1917, pp. 18-22, September 2012.

6. Bodur H, Cetin S., “An Improved HPF-SS AC-DC Converter”, International Review of Electrical Engineering (IREE), Volume:7, Issue:5, pp.5299-5309, October 2012.

7. S. Cetin, "Optimization of a self-driven current-doubler phase shifted full bridge DC-DC converter with integrated magnetic, Journal of Engineering Research, Volume: 2, Issue:4, pp. 48-63, December 2014.

8. S. Cetin, “High Efficiency Design Considerations for the Self-Driven Synchronous Rectified Phase-Shifted Full-Bridge Converters of Server Power Systems", Journal of Power Electronics, Volume: 15, Issue:3, pp. 634-643, May 2015.

9. S. Cetin, "Optimal Design Methodology of Zero-Voltage-Switching Full Bridge Pulse Width Modulated Converter for Server Power Supplies Based on Self-driven Synchronous Rectifier Performance", Journal of Power Electronics, Volume: 16, Issue:1, pp. 121-132, January 2016.

10. S. Cetin, An Improved Zero Voltage Transition PWM Boost Converter with An Active Snubber Cell", Journal of Circuit, Sytems, and Computers, Volume 25, Issue:10, pp. 1650128-1, 1650128-23, October 2016, DOI: 10.1142/S0218126616501280.

11. S. Cetin, "Power Factor Corrected and Fully Soft Switched PWM Boost Converter, IEEE Transactions on Industry Applications, DOI:10.1109/TIA.2018.2821101, Volume: 54, Issue: 4, pp. 3508-3517, July-August 2018.

12. S. Cetin, High Efficiency Design Procedure of a Second Stage Phase Shifted Full Bridge Converter for Battery Charge Applications Based on Wide Output Voltage and Load Ranges, Journal of Power Electronics, Volume:18, Issue:4, pp.975-984, July 2018.

 

National Journal Papers

1. Cetin S., "Veri Merkezi Uygulamaları için Yüksek Verimli Bir LLC Rezonanslı DC-DC Dönüştürücü Tasarımı ", Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 5, No: 1, pp. 45-54,  2017. 

2. Cetin S., "High Efficiency Design Approach of A LLC Resonant Converter for On-Board Electrical Vehicle Battery Charge Applications", Pamukkale University Journal of Engineering Science, Volume: 23, No: 2, pp. 103-110, 2017. 

3. Çetin, S., Sazak, B.S. "Mutfak Tipi Isıtma Cihazları İçin Üç Çıkışlı Bir Seri Rezonans İnverter Uygulaması", Teknoloji Dergisi, Cilt:8, No:1, pp. 7-16, 2006.

4. Çetin S., Sazak, B.S. "Mutfak Tipi Isıtma Uygulamaları İçin İki Çıkışlı Bir İndüksiyon Isıtma İnverteri Tasarımı", Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt:12, No:3, pp.397-401, 2006.

5. Sazak, B.S., Öncü, S., Çetin, S., "Bir Ev Tipi İndüksiyon Isıtma Sistemi Tasarım Metodu", Teknoloji Dergisi, Cilt:8, No:4, pp. 321-329, 2005.


International Conference Papers

1. Çetin, S., Sazak, B.S. "Mutfak Tipi Isıtma Uygulamaları İçin Üç Yarım Köprü Seri Rezonans İnverter", IV. Uluslararası İleri Teknolojiler Sempozyumu, Cilt:1, pp.278-282, 28-30 Eylül 2005, Konya/Türkiye.

2. Cetin, S., Oncu, S., Sazak, S."Computer Aided Design of A Three Output Induction Cooking Appliance for Home Cooking Applications", International Conference on Modeling and Simulation (AMSE'06), Cilt 1, pp.39-41, 28-30 August 2006, Konya/Türkiye.

3. Oncu, S., Cetin, S., Sazak, S. Analysis and Simulation of Voltage Fed Class E Inverter”, International Conference on Modeling and Simulation (AMSE'06), Cilt 1, pp.49-51, 28-30 August 2006, Konya/Türkiye.

4. Sazak, B.S., Cetin, S., Oncu, S. “Evaluation of An Induction Heated Cooking Application”, Applied Electronics 2007 International Conference (APPEL2007), Cilt:1, pp.187-190,5-6 September 2007, Pilsen/Czech Republic.

5. Cetin, S., Sazak, B.S., “An Induction Cooking Appliance for Alternative Loads”, Applied Electronics 2007 International Conference (APPEL2007), Cilt: 1, pp.29-32, 5-6 September 2007, Pilsen/Czech Republic.

6. Sazak, B.S., Yilmaz S., Cetin, S., Interactive Web-Based Training Tool for A Single Switch Induction Cooking System” , ECTI-CARD 2009, Vol:1., pp.133-136, 3-5 May 2009, Bangkok/Thailand.

7. Cetin, S., Sazak, B.S., Bodur H., “A Comparative Study of Dual Half-Bridge Inverter Topologies Used in Induction Cooking”, ECTI-CON 2009, Vol.1, pp.314-317, 6-9 May 2009, Pattaya/Thailand.

8. Sazak, B.S., Cetin, S., “Reducing The Number of Measurements in Induction Cooker Design”, International Conference on Electronic Measurement & Instruments, pp. 450-454, 16-19 August 2009, Beijing/China.

9. Sazak, B.S., Cetin, S., Oncu, S., “Computer Aided Instruction for Electrical Engineering”, International Conference on the Role of Universities in Hands-On Education, 23-29 August 2009, Chiang Mai/Thailand.

10. Sazak, B.S., Cetin, S., “Affect of Operation Conditions of Triple Half Bridge Series Resonant Inverter for Harmonic Distortion and Power Factor”, 13. International Symposium on Mechatronics, pp.18-20, 2-4 June 2010, Trencianske Teplice/Slovakia.

11. Bodur, H., Cetin, S., Yanık, G., “A New ZVT-PWM Boost Converter with Active Snubber Cell”, SDEMPED 2011 International Symposium, pp. 139-144, 5-8 September, 2011, Bologna/Italy.

12. Cetin, S., Bodur, H., Yanık, G., A New Fully Soft Switched Boost Converter, EPQU 2011, pp. 1-5, 17-19 October 2011, Lisbon/Portugal.

13. Bodur, H., Cetin, S., Yanik, G.,Fully Soft Switched and High Power Factor AC-DC Converter, Power Electronics Machines & Drives Conference, pp. 1-6, 27-29 March 2012, Bristol/UK.

14. Cetin S., Bodur H., “Small Signal Modeling and Analysis of Soft Switching and High Power Factor AC-DC Converter”, ICAT’14 International Conference on Advanced Technology and Sciences, pp. 483-488, 116-121, August 12-15 2014, Antalya/Turkey.

15. Cetin S., “Optimization of a Self Driven Current-Doubler Phase Shifted Full Bridge DC-DC Converter with Integrated Magnetics”, ICAT’14 International Conference on Advanced Technology and Sciences, pp. 116-121, August 12-15 2014, Antalya/Turkey.

16. Cetin S., “Wide Load Range High Efficiency Design Consideration of a Self-Driven Synchronous Rectified Phase-Shifted Full-Bridge Converter for Data Center Application”, Int. Conference on Power Engineering, Energy and Electrical Drives, pp. 33-43, 15-17 December 2014, Istanbul/Turkey.

17. Cetin S., “Self-Driven Phase Shifted Full Bridge Converter for Telecom Applications”, Int. Conference on Power Engineering, Energy and Electrical Drives, pp. 196-203, 15-17 December 2014, Istanbul/Turkey.

18. Cetin S., “Performance Analysis of A Self Driven Phase Shifted Full Bridge Converter For Data Center Applications.  Advance in Engineering Mechanics and Materials”, pp. 41-47, 17-21 July 2014, Santorini/Greece.

19. Cetin S., Erdem E., “Performance Comparison of PSFB-PWM Converter and LLC Resonant Converter for On-Board Electrical Vehicle Battery Charger”, 3rd International Conference on Advance Technology&Science, pp.507-511, 1-3 September 2016, Konya/Turkey.

20. Cetin S., Astepe A., “A Phase Shifted Full Bridge Converter Design for Electrical Vehicle Battery Charge Applications Based on Wide Output Voltage Range”, 21st Applied Electronics, pp. 51-56, 6-8 September 2016, Pilsen/Czech Republic.

21. Cetin S., “An Improved Fully Soft Switched PWM Boost Converter”, IEEE 17th International Conference on Power Electronics and Motion Control (PEMC), pp. 57-62, 25-30 September 2016, Varna/Bulgaria.

22 Cetin S., “Performance Evaluation of LLC Resonant Converter for Battery Charge Application”, International Conference on Technology, Engineering and Science (ICONTES), pp. 1-9, 26-29 October 2017, Antalya/Turkey.

23 Cetin, S., Yıldız, N. “High Efficiency Design and Simulation of a Front End AC-DC PFC Converter for EV Battery Charger”, International Conference on Engineering Technologies”, pp. 1-5, 7-9 December 2017, Konya/Turkey.

24. Oner, Y. Cetin S., “Core Loss Estimation Model for an Integrated Magnetic Current Doubler Soft Switched Full-Bridge DC-DC Converter, International Conference on Engineering Technologies”, pp. 1-5, 7-9 December 2017, Konya/Turkey.

25. Cetin, S., Yenil V., “Optimal Operation Region of LLC Resonant Converter for On-Board EV Battery Charger Applications”, IEEE 18th International Conference on Power Electronics and Motion Control, pp. 78-85, 26-30 August 2018, Budapest/Hungary.

26. Cetin S., “Accurate Prediction of Voltage Gain of the LLC Resonant Converter for EV Battery Charge Applications”, 6th International Symposium on Innovative Technologies in  Engineering and Science (ISITES2018), pp. 544-557, 09-11 November 2018, Alanya/Turkey.

27. Cetin S.  Yenil, V., “A Full Soft Switched Bridgeless Power Factor Corrected AC-DC Converter”, Aegean Conference on Electrical Machines and Power Electronics (ACEMP2019), pp. 1-6, 27-29 August 2019, Istanbul / Turkey.


National Conference Papers

1. Bodur, H., Cetin, S., Yanık G., “Tek Aşamalı PFC Devrelerinin İncelenmesi”, Elektrik-Elektronik ve Bilgisayar Mühendisliği Sempozyumu (ELECO 2010), 2-5 Aralık 2010, Bursa.

2. Çetin, S., Öncü, S., Alpaslan, H., Sazak, B.S., “D Sınıfı Bir Seri Rezonans İndüksiyon Isıtma İnverterinin Matlab ve PSpice Benzetimlerinin Karşılaştırılması”, Ulusal Teknik Eğitim, Mühendislik ve Eğitim Bilimleri Genç Araştırmacılar Sempozyumu, 20-22 Haziran 2007, Cilt:1, pp.251-254, Kocaeli.

3. Sazak, B.S., Öncü, S., Cetin, S., “Çağdaş Mesleki Teknik Eğitim: Sorunlar ve Giderme Çareleri”, 2000’li Yıllarda Lise Eğitimine Çağdaş Yaklaşımlar Sempozyumu, pp. 135-138, 8-9 Haziran 2002, İstanbul.

4. V. Yenil, S. Cetin, “Elektrikli Araç Kablosuz Batarya Şarjında Kullanılan Kompanzasyon Devrelerinin Sabit Akım ve Sabit Gerilim Şarj Kontrol Durumlarında İncelenmesi, Otomatik Kontrol Türk Milli Komitesi Ulusal Toplantısı, 11-14 Eylül 2019, pp. 1-6, Mugla.


Research Projects

1. Researcher, Improving and Realization of A New Soft Switching and High Power Factor AC-DC Converter, Grant number: 29-04-02 BAPK, Yildiz Technical University, 12000 TL, 2010-2012.

2. Coordinator, Optimal Design of A High Power Density and High Efficiency DC-DC Converter, Grant number: 2014BSP005, Pamukkale University, 18 months, 30000 TL, April 2014-October 2015.

3. Coordinator, High Efficiency Optimal Design Approach of A Phase Shifted Full Bridge DC-DC Converter for Data Center or Telecom Applications, Grant Number: 114E010, TUBITAK 3001 Project, 18 months, 73309.70 TL, April 2014-October 2015.

4. Coordinator, High Efficiency DC-DC Converter Design for Electrical Vehicle Battery Charge, Grant Number: 2015FBE057, Pamukkale University, 12 months, 15000 TL, December 2015-December 2016.

5. Coordinator, Optimal Design of A High Efficiency and High Power Density On Board Electrical Vehicle Battery Charger, Grant Number: 116E125, TUBITAK 3501 Career Project, 24 months, 300000 TL, May 2017- May 2019.

6. Coordinator, Wireless Energy Transfer Circuit Design for Pacemaker Applications, Grant Number: 2019FEBE064, Pamukkale University, 12 months, 18000 TL, December 2019-Continue.

 

Courses

BMM219 Circuit Analysis, Biomedical Engineering (every fall semester)

BMM301 Electronic Circuits-I, Biomedical Engineering (every spring semester)

BMM110 Digital Logic Design, Biomedical Engineering (every spring semester)

ELK601 Analysis of DC-DC Converters, Electrical-Electronics Engineering (offered every fall semester)

ELK602 High Power Density SMPS Design, Electrical-Electronics Engineering (offered every spring semester)

EEEN417 Power Electronics, Biomedical Engineering (offered every fall semester)

BMM340 Industrial Applications in Power Electronics,  Biomedical Engineering (offered every spring semester)

 

Managed Thesis

Veli Yenil, PhD, Electrical-Electronics Engineering, 2018-Continue.

Ali Rıza Keskin, Master, Biomedical Engineering, 2018-Continue.

Yunus Emre Demirci, Master, Biomedical Engineering, 2019-Continue.