Etkinlik Takvimi

<Eylül 2017>
PztSalÇarPerCumCmtPaz
28293031123
45678910
11121314151617
18192021222324
2526272829301
2345678
Tümünü Gör

 

 

Ögrenim Bilgileri

PhD, Colorado School of Mines, USA

MSc, Missouri Technical University, USA
BSc, Ankara University, TR

Bilimsel (SCI ve SCI-Expanded) dergilerde yayınlanan makaleler


Yağız S. 2011. pH of testing liquid controls on the slake durability of carbonate rocks, Environmental Earth Sciences, x, xx-xx 


Yağız S. 2011. Discussion on the manuscript entitled “Prediction of thrust and torque requirements of TBMs with fuzzy logic models” by O. Acaroglu, [Tunnelling and Underground Space Technology, 26 (2011) 267-275]. Tunneling and Underground Space Technology, x, xx-xx.

 

Yağız S, Sezer EA, Gokceoglu C. 2011. Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks, International Journal for Numerical and Analytical Methods in Geomechanics, x, xx-xx.

 

Yağız S. 2011. Comments on the article “Performance prediction of hard rock TBM using Rock Mass Rating (RMR) system” by J.K. Hamidi et al. [Tunneling and Underground Space Technology, 25 (2010) 333-345]. Tunneling and Underground Space Technology, x, xx-xx.

 

Yağız S. 2010. Using p-wave velocity test for the assessment of some geotechnical properties of rock materials. Bulletin of Materials Science, x, xx (accepted).

 

Yağız S. 2010. Correlation between slake durability and rock properties for some carbonate rocks. Bulletin of Engineering Geology and the Environments, DOI: 10.1007/s10064-010-0317-8.

 

Yagiz S, Karahan H. 2011. Prediction of hard rock TBM penetration rate using particle swarm optimization, International Journal of Rock Mechanics and Mining Sciences, 48(3), 427-433.

 

Yağız S. 2010. Geomechanical properties of construction stones quarried in Southwestern Turkey. Scientific Research and Essays, 5(8), 750-757.

 

Yağız S. 2010. Discussion on “Assessment of some brittleness indexes in rock-drilling efficiency” by Rasit Altindag, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-009-0057-x. Rock Mechanics and Rock Engineering, 43, 371-373.

 

Yağız S, Gökçeoğlu C. 2010. Application of fuzzy inference and non-linear regression methods for predicting rock brittleness. Expert Systems with Applications, 37, 2265-2272.

 

Yağız S. 2010. Comments on “Multifactorial fuzzy approach to the penetrability classification of TBM in hard rock conditions” by R. Mikaeil, M.Z. Naghadehi and F. Sereshki. [Tunneling and Underground Space Technology, 24 (2009) 500-505]. Tunneling and Underground Space Technology, 25, 95-96.

 

Yağız S, Gökçeoğlu C, Sezer E, İplikçi S. 2009. Application of two non-linear prediction tools to the estimation of tunnel boring machine performance. Engineering Application of Artificial Intelligence, 22, 818-824.

 

Yağız S. 2009. Discussion on the paper entitled “Indentation hardness test to estimate the sawability of carbonate rocks” by S. Kahraman and O. Gunaydin. Bull Eng Geol and the Environ. 67, 507-511. Bulletin of Engineering Geology and the Environment, 68, 437-439.

 

Yağız S.  2009. Predicting uniaxial compressive strength, modules of elasticity and index properties of rocks using Schmidt hammer. Bulletin of Engineering Geology and the Environment, 68, 55-63.

 

Yağız S. 2009. Discussion on the article ‘‘Influence of rock brittleness on TBM penetration rate in Singapore Granite” by Q.M. Gong and J. Zhao [Tunneling and Underground Space Technology 22 (2007) 317–324] and ‘‘Response by the Authors to R.M. Goktan Discussion to the paper ‘‘Influence of rock brittleness on TBM penetration rate in Singapore Granite” by Q.M. Gong and J. Zhao [Tunneling and Underground Space Technology 23 (2008) 217–218]. Tunneling and Underground Space Technology, 24, 115-116.

 

Yağız S. 2009. Assessment of brittleness using rock strength and density with punch penetration test. Tunneling and Underground Space Technology, 24, 66-74.

 

Yağız S. 2008. Utilizing rock mass properties for predicting TBM performance in hard rock condition. Tunneling and Underground Space Technology, 23, 326-339. [Prof. Dr. Kemal Erguvanlı Research Award in 2009 by Turkish National Committee of IAEG].

 

Yağız S, Akyol E, Şen G. 2008. Relationship between standard penetration and pressuremeter test on sandy silty clays: A case study from Denizli. Bulletin of Engineering Geology and the Environment, 67, 405-410.

 

Ulusal ve uluslararası diğer hakemli dergilerde yayınlanan makaleler


Yağız S. 2010. Denizli ili çevresinde işletilen kayraktaşlarının yapıtaşı olarak kullanılabilirlikleri. PAU, Mühendislik Bilimleri Dergisi, x(x); xx-xx  [incelemede]

 

Yağız S. 2009. Başçeşme Formasyonu (Başçeşme-Denizli) dolomitik kireçtaşı üyesinin yapıtaşı olarak kullanılabilirliği. SDU, Fen Bilimleri Dergisi, 13(3); 265-270

 

Yağız S. 2001. Brief notes on the influence of shape and percentage of gravel on shear strength of sand and gravel mixture. Bulletin of Engineering Geology and the Environments, 60, 321-323

 

Yazılan uluslararası kitaplar


Özkul M, Yağız S, Jones B, (Eds). 2005. Proceedings of 1st international symposium on travertine. 420p, Kozan publisher, Ankara Turkey (in English).

 

Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler


Yağız S. 2010. Travertine as construction and building material. In: 2nd International Symposium on Sustainable Development. Padem H. et al (Eds), 667-673, June 8-9, 2010 Sarajevo, Bosnia-Herzegovina

 

Yağız S, Merguerian C, Kim T. 2010. Geological controls on the breakthrough of tunnel boring machines in hard rock crystalline terrains. In: Eurock’10-Rock Mechanics in Civil and Environmental Engineering; Proceedings of the ISRM Regional Symposium. Zhao J. et al. (Eds), 4p. June 15-18, 2010. Lausanne, Switzerland.

 

Yağız S,  Rostami J, Kim T, Özdemir L, Merguerian C. 2009. Factors influencing performance of hard rock tunnel boring machine. In: Eurock’09-Rock Engineering in Difficult Ground Conditions, Soft Rocks and Karst; Proceedings of the ISRM Regional Symposium. Vrkljan I. (Ed), 695-700. October 21-31, 2009. Cavtat, Croatia.

 

Yağız S. 2009. Geotechnical considerations on TBM tunneling in rock media. In: Proceedings of 2nd International Conference on New Developments in Soil Mechanics and Geotechnical Engineering. Atalar C, et al. (Eds), 504-511. May 28-30, 2009. Nicosia, Northern Cyprus.

 

Yağız S, Rostami J, Özdemir L. 2008. Recommended rock testing methods for predicting TBM performance: focus on the CSM and NTNU Models. In: Proceedings of 5th Asian Rock Mechanics Symposium. Majdi A, Ghazvinian A. (Eds), 1520-1530. November 24-26, 2008. Tehran, IRAN.

 

Yağız S. 2006. Recent advancement in predicting TBM performance. In: The Proceedings of 7th International Congress on Advances in Civil Engineering. 10p. in DVD. October 11-13, 2006. Istanbul, Turkey.

 

Yağız S. 2006. A model for prediction of tunnel boring machine performance. In: The 10th Int. Association of Engineering Geologists Congress. Substructures and Underground Space. Paper no. 383. Engineering geology for tomorrow`s cities. 10p. in DVD. The Geological Society of London, September 6-10, 2006. U.K.

 

Yağız S. 2006. Overview on geo-mechanical assessments of Denizli travertines in Turkey. In: The 10th International Association of Engineering Geologists Congress. City Resources.  Paper no. 384. Engineering geology for tomorrow`s cities. 7p. in DVD. The Geological Society of London, September 6-10, 2006. U.K.

 

Yağız S. 2006. TBM performance prediction based on rock properties. In: Eurock’06-Multiphysics Coupling and Long Term Behavior in Rock Mechanics; Proceedings of the ISRM Regional Symposium.  Cotthem AV, et al. (Eds), 663-670. 708p. May 9-12, 2006. Liege, Belgium.

 

Yağız S. 2006. Machine selection criteria for mechanical excavation of natural materials. In: 11th International Material Symposium. 5p. in DVD. April 19-21, 2006. Denizli, Turkey.

 

Yağız S, Akyol E.  2005. Geomechanical assessment of travertine in Antalya Region. In: Proceedings of 1st International Symposium on Travertine. Özkul M, Yağız S, Jones B. (Eds), 235-239. September 21-25, 2005.  Denizli, Turkey.

 

Kaya A, Yağız S. 2005. Influence of regional tectonics and geological structures on marble quarry operation: An example from Antalya Region. In: Proceedings of 1st International Symposium on Travertine. Özkul M, Yağız S, Jones B. (Eds), 135-141. September 21-25, 2005. Denizli, Turkey.

 

Akyol E, Yağız S, Özkul M, Şen G, Kato S. 2005. Physical properties of hot spring travertines related to lithotypes at Pamukkale Region in Denizli. In: Proceedings of 1st International Symposium on Travertine. Özkul M, Yağız S, Jones B. (Eds), 286-290. September 21-25, 2005. Denizli, Turkey.

 

Aydın A, Yağız S, Özpınar Y, Semiz B. 2005. Investigation of travertine properties using geophysical methods. In: Proceedings of 1st International Symposium on Travertine. Özkul M, Yağız S, Jones B. (Eds), 305-308. September 21-25, 2005. Denizli, Turkey.

 

Yağız S. 2001. Overview of classification and engineering properties of shale for design considerations. In: Proceedings of Second Congress on Construction and Materials Issues. American Society of Civil Engineers. Civil Engineering Conference and Expositions 2001. Hancher DE. (Ed), 156-165. October 10-13, 2001. Houston, TX USA.

 

Yağız S, Cheema S. 2001. Review and comparison of rock mass classification systems. In: Proceedings of 68th Annual Session Pakistan Engineering Congress. paper no.629, Rizwan AS. (Ed), Vol.68: 449-460. January 19, 2001. Lahore, Pakistan.

 

Çığla M, Yağız S, Özdemir L. 2001. Application of tunnel boring machines in underground mining development. (Keynote) In: Proceedings of 17th International Mining Congress & Exhibition of Turkey. Unal E, et al. (Eds), 155-164. June 19-22, 2001. Ankara, Turkey.

 

Ulusal bilimsel toplantılarda sunulan ve bildiri kitabında basılan bildiriler


Sezer E, Bozkır AS, Yağız S, Gökçeoğlu C. 2010. Karar ağacı derinliğinin CART algoritmasında kestirim kapasitesine etkisi: Bir tünel açma makinesinin ilerleme hızı üzerinde uygulama. Akıllı Sistemlerde Yenilikler ve Uygulamaları Sempozyumu. X, vd. (Eds), 4s. ASYU 2010, Haziran 21-24, 2010. Kayseri.

 

Yağız S, Özdemir L, Rostami J. 2008. Kaya kütlelerinde mekanik kazılar için önerilen laboratuvar deneyleri. IX. Bölgesel Kaya Mekaniği Sempozyumu. Türk N, vd. (Eds), 225-244. Ekim 30-31, 2008. Dokuz Eylül Üniversitesi, Izmir.

 

Yağız S, Uysal M, Tuzcuoglu MB. 2008. Zayıf kayaların basit fiziksel özellikleri (yoğunluk, gözeneklilik, su emme, doluluk) ve Schimidt yüzey sertlikleri arasındaki ilişkinin istatistiksel irdelenmesi. 6. Mermer ve Doğal Taş Sempozyumu. Mersem`08. Ersoy M, vd. (Eds), 303-312. Haziran 26-27, 2008. Afyon.


Özkul M, Yağız S. 2007. Çal bölgesinin jeolojisi ve doğaltaş kaynakları. Çal Sempozyumu Bildirileri. Topuz B, vd. (Eds), 198-204. Eylül 1-3, 2006 Denizli.

 

Yağız S. 2006. Kayaların kesilebilirliği ve bazı mühendislik özelikleri arasındaki ilişkinin araştırılması. VIII.Bölgesel Kaya Mekaniği Sempozyumu, Vardar M, vd. (Eds), 99-106. Kasım 2-3, 2006. ITU, Istanbul.

 

Yağız S, Kumsar H, Özkul M, Şen G. 2006. Yerleşim alanları için mühendislik jeolojisi incelemesi: Denizli Organize Sanayi Bölgesi Örneği. Mühendislik Jeolojisinde Çağdaş Uygulamalar Sempozyumu. Kumsar H, vd. (Eds), 573-582. Mayıs 25-27, 2006. Denizli.

 

Kumsar H, Özkul M,  Yağız S, Taşdelen S, Hançer M, Kaya A, Kaya M, Topal S, Erten H. 2006. Denizli Çevre Yolu Etrafındaki Alanların yerleşim yeri olarak seçilebilirliğinin jeolojik ve jeoteknik açıdan incelenmesi. Mühendislik Jeolojisinde Çağdaş UygulamalarSempozyumu. Kumsar H, vd. (Eds), 533-542. Mayıs 25-27, 2006. Denizli.

 

Aydın A, Yağız S. 2006. Doğal taş ocaklarında yer radarı (GPR) ve sismik kırılma yöntemlerinin kullanılması. Mühendislik Jeolojisinde Çağdaş Uygulamalar Sempozyumu. Kumsar H, vd. (Eds), 415-422. Mayıs 25-27, 2006. Denizli. 


Yağız S, Aydın A. 2006. Doğal taş işletmeciliğinde jeoteknik araştırmalar: Karataş Mevkii (Denizli) doğal taş incelemesi. 5.Mermer ve Doğal Taş Sempozyumu. Mersem`06. Ersoy M, vd. (Eds), 229-239. Mart 2-3, 2006. Afyon.

 

Özet sunum ve diğer yayınlar


Yağız S, Gökçeoğlu C, Sezer E. 2010. Comparison of two non-linear prediction techniques for estimation of some intact rock parameters. European Geosciences Union, General Assembly, Geophysical Research Abstracts, Vienna, Austria. 


Yağız S, Kim T, Merguerian C. 2010. Tam cepheli tünel delme makinelerinin ilerleme hızına etki eden faktörler. 63.Türkiye Jeoloji Kurultayı, Özet, 200-201. Nisan 4-9, 2010. MTA Genel Müdürlüğü, Ankara. 


Yağız S, Zorlu K. 2009. Suda dağılmaya karşı duraylılık indeksi çevrim sayısının tane şekli üzerindeki etkisinin fraktal boyut yaklaşımı kullanılarak araştırılması. 62.Türkiye Jeoloji Kurultayı, Özet, s398. Nisan 13-17, 2009. MTA Genel Müdürlüğü, Ankara. 


Yağız S.  2009. Kayaçlarda kırılganlık indeksi hesaplaması için uç batırma deneyinin kullanılması. 62.Türkiye Jeoloji Kurultayı, Özet, s400. Nisan 13-17, 2009. MTA Genel Müdürlüğü, Ankara.

 

Yağız S, Tuzcuoğlu MB, Uysal M. 2008. Zayıf dayanımlı kayaçların Schmidt sertlik değeri, tek eksenli basınç dayanımı ve indeks özellikleri arasındaki ilişki. 61. Türkiye Jeoloji Kurultayı, Özet, s41. Mart 24-28, 2008. MTA Genel Müdürlüğü, Ankara.

 

Yağız S. 2007. Doğaltaş Dünyasının dört atlısı: mermer, jeoteknoloji, çevre ve sağlık... Türkiye Taş Dünyası; Taş ve Taş Teknolojileri Dergisi.  Sayı: 46, s438-442. Mart-Nisan, 2007.

 

Yağız S. 2007. I. Uluslararası Traverten Sempozyumu’nun ardından.... Turquosite Uluslararası Doğaltaş Dergisi. s288-291. Izmir Fair Special Issue. March, 2007.

 

Yağız S. 2006. Üniversite ve doğal taş sektörü işbirliği. Türkiye Taş Dünyası; Taş ve Taş Teknolojileri Dergisi. Sayı:46, s18. Mart-Nisan, 2006.

 

Yağız S. 2006. Doğal taş rüyası ve gerçeği. Türkiye Taş Dünyası; Taş ve Taş Teknolojileri Dergisi. Sayı: 48, s186-188. Haziran-Temmuz, 2006.

 

Yağız S. 2006. Kaya dayanımları ve kırılganlık arasındaki ilişkinin araştırılması. 59. Türkiye Jeoloji Kurultayı, Özet, s352. Mart 20-24, 2006. MTA Genel Müdürlüğü, Ankara.

 

Kumsar H, Yağız S, Özkul M, Şen G. 2005. Denizli organize sanayi bölgesi ilave yapılaşma alanının jeoteknik açıdan incelenmesi. 58. Türkiye Jeoloji Kurultayı, Özet, s187. Nisan 11-17, 2005. MTA Genel Müdürlüğü, Ankara.

 

Yağız S. 2004. Seçilen kaya türlerinde tek eksenli basma dayanımı ve kaya kırılganlığı arasındaki ilişki. 57. Türkiye Jeoloji Kurultayı, Özet, s160. Mart 8-12, 2004. MTA Genel Müdürlüğü, Ankara.

 

Yağız S. 2004. Intak ve kütle kaya parametreleri ile tünel açma makineleri performansı arasındaki ilişki. 57. Türkiye Jeoloji Kurultayı, Özet, s175. Mart 8-12, 2004. MTA Genel Müdürlüğü, Ankara.

 

Yağız S. 2003. Sert kaya koşullarında tam cepheli tünel açma makinelerinin ilerleme hızını tahmin için bir model. 56. Türkiye Jeoloji Kurultayı, Özet, s227. Nisan 14-20, 2003. MTA Genel Müdürlüğü, Ankara.

 

Yağız S. 2002. Application of rock engineering in mechanical tunneling. 45th Annual Meeting of Association of Engineering Geologists. In: Program with Abstracts. Technical Session 12: Transportation Engineering Geology. p82. September 23-29, 2002. Reno, NV USA.

 

Yağız S, Özdemir L. 2001. Geotechnical parameters influencing the TBM performance in various rocks. 44th Annual Meeting of Association of Engineering Geologists. In: Program with Abstracts. Technical Session 10: Engineering Geology for Construction Practices. p79. September 29-October 7, 2001. Saint Louis, MO USA.

 

Yağız S. 2001. Geotechnical aspects of Turkish Earthquake, 17 August 1999. 44th Annual Meeting of Association of Engineering Geologists. In: Program with Abstracts. Technical Session 11: Natural Hazards: Recognition and Risk Assessment. p80. September 29-October 7, 2001. Saint Louis, MO USA.

 

Yağız S. 2001. Strength and related properties of concrete a quantitative approach. Popovics S. John Wiley & Sons Inc., New York 1998. Book Reviewed in Journal of Environmental & Engineering Geosciences, 7(1):111. February, 2001. TX USA.

 

Yağız S. 2001. Filters and drainage in geotechnical and environmental engineering. Wolski W, Mlynarek J. (Eds). 2001. Book Reviewed in Journal of Environmental & Engineering Geosciences, 7(1):113. February, 2001. TX USA.

 

Yağız S. 2001. Damage and fracture in heterogeneous materials; Modeling an Application to Improvement of Drilling Tool. Mishnaevsky L, Jr. Balkema Rotterdam. 1998. Book Reviewed in Journal of Environmental & Engineering Geosciences, 7(1):114. February, 2001. TX USA.

 

Yağız S. 2001. Influence of gravity on granular soil mechanics. Katti RK, Katti AR, Katti DR. 2001. A. A. Balkema Rotterdam. Brookfield. 2000. Book Reviewed in Journal of Environmental & Engineering Geosciences, 7(3):298. August, 2001. TX USA.

 

Yağız S. 2000. Evaluation of rock mass classifications for supporting TBM tunnels. 43rd Annual Meeting of Association of Engineering Geologists. In: Program with Abstracts. Technical Session 23: Material Characterization. p122. September 19-26, 2000. San Hose, CA USA

 

Projeler


2006-2008. An investigation on the relationship between lithological features and slake durability index of travertine in Denizli, with Akyol E. Scientific Research Unit of Pamukkale University, Project no: 2006:MHF004, as coordinator

 

2005-2006. Report on the geotechnical investigation of areas around the Denizli Ring Road for site selection in urbanization, with Kumsar H, Ozkul M, Tasdelen S, Hancer M, Kaya A, Kaya M, Alcicek MC, Topal S, Erten H. 97p, Geological Engineering Department of Pamukkale University, Denizli

 

2004-2005. Geotechnical investigation of additional construction area of Denizli Organize Industry Region, with Kumsar H, Ozkul M, Sen G. 80p, Geological Engineering Department of Pamukkale University, Denizli

 

2004. Report on the engineering properties of Elmali and Korkuteli travertine in Antalya, with Akyol E. 40p, Geological Engineering Department of Pamukkale University, Denizli

 

2000-2002. Braintree Weymouth Swear Tunnel Project Report, with Ozdemir L, Cigla M, Asbury B, Kim T. Earth Mechanics Institute, Colorado School of Mines, CO USA

 

1999-2001. Manapouri Hydropower Tunnel Project Report, with Ozdemir L, Cigla M, Asbury B, Kim T.Earth Mechanics Institute, Colorado School of Mines, CO USA

 

1998-2000. Queens Water Tunnel No.3, Stage 2 Report, with  Ozdemir L,  Cigla M, Asbury B, Kim T. arth Mechanics Institute, Colorado School of Mines, CO USA